Battery electrofisher IG200-2 Serie with direct current and pulse current output.

IG200-2B/C/D:

Battery electrofisher with direct current and pulse current output.
Inbuilt deadman circuit and tiltswitch

Lead gel battery 12V 24Ah

Protection class II, protection kind IP55

Frequency 10-100 pulses per second

Outputvoltage at pulse operation:

IG200-2B: 300/400/500/600Vs

IG200-2C: 400/600/800/1000Vs

IG200-2D: 350/500/650/800Vs

Power at pulse operation:
Level 1 max. 5,0 KW per pulse
Level 2 max. 10,0 KW per pulse
Current consumption at
Level 1 max. 15A
Level 2 max. 20A
Level 3 max. 25A
 

Direct current output

IG-200-2B: 150/200V 250 watts

IG-200-2C: 200/300V 250 watts

IG-200-2D: 175/250V 250 watts

Delivered complete with battery charger and inbuilt battery
Weight: 14 Kg

Advantages:

• Efficient: to 10kW/Imp. and  250 W DC 
• Large voltage raqnge depending on type up to 600, 800, 1000 volts (see technicaql data)
• Frequency progressively adjustable
• Silent
• High-quality, most modern electronics
• Run safe batteries

Use possibilities:
The equipment is particularly suitable for small not too deep waters. The fish withdrawal from cultivation ponds is made easier.
Ideal for scientific examinations.
By the operation on impulse current it is suitable also for waters with a high conductivity (e.g. strongly dirty water and brackish water).  

Operating time
An operating time of approx. 5 hours is reached at a pure pulse operation in the practice. At the device IG200/2 you reaches for direct current operation under full load a time of approx. 35 minutes.
H prolongs himself in the practice, however, on approx. 2-3 since this one does always not need the maximum performance and the dead man man nonlocking key is not always pushed. One wants, longer fish recommends himself a 2nd battery bank so to carry. It is at all equipment to change the batteries very easily and in shortest time possibly.

• battery box put together on back carrying rack, batteries installed.
• Tax part 
• External battery charger 12 V/1.8 A

 
Choice of the equipment tension:
This goes by the waters conductivity. The execution is standard to 600 volts. The execution can be recommended to 800 volts . at low waters conductivities among 250 Mikrosiemens

Accessories for an extra charge:
rocker switch equipment: Safety addition for best possible personal security .
The rocker switch equipment as safety facilities serves your best possible safety. Inclines more than 60 degrees (in every direction) (tiltposition), this becomes dead man man relays and therefore the exits of the device in the switchbox if you putt it off. After switching on the device, at first you must push the one keyboard at the switchbox. The monitoring light comes on and a humming sound sounds if you are not in a tiltposition. You can switch on the exit with the dead man man keyboard (bar or external) now. The person who carries the device is protected.